Posts for tag: porcelain veneers
Porcelain veneers are a great way to enhance an unattractive smile. But are they appropriate for teenagers? The answer usually depends on a patient’s current development stage and the type of veneer used.
Veneers are thin layers of porcelain bonded to the front of teeth. But even though quite thin, they can appear bulky if we don’t first remove some of the tooth’s enamel surface. This is irreversible, so the tooth may require a restoration from then on.
This could be a major issue for teens whose permanent teeth are still developing. During this period the tooth’s central pulp is relatively large and the dentin layer not fully developed. As a result, the pulp’s nerves are often closer to the surface than in an adult tooth. This increases risk of nerve damage during veneer preparation; if nerve damage occurs, the tooth could ultimately require a root canal treatment to save it.
On the other hand, some types of veneers don’t require tooth alteration (or only very little) beforehand. These “no-prep” or “minimal prep” veneers are best for certain situations like abnormally small teeth, so we must first determine if using such a veneer would be appropriate for your teen.
In effect, we’ll need to weigh these and other factors before determining if veneers are a safe choice for your teen. That being the case, it may be more advisable to consider more conservative cosmetic techniques first. For example, if enamel staining is the main issue, you could consider teeth whitening. Although the often amazing results eventually fade, whitening could still buy some time until the teeth have matured to safely apply veneers.
Slight deformities like chipping can often be corrected by bonding tooth-colored composite material to the tooth. In artistic hands it’s even possible to create a full veneer effect with very little if any tooth preparation. How much we can apply, though, depends on tooth size, and it won’t be as durable as a porcelain veneer.
With that said, veneers could be the right solution to enhance your teen’s smile. But, we’ll need to carefully consider their dental situation to ensure their new smile remains a healthy one.
With exciting innovations in cosmetic dentistry over the last few decades, we can now transform nearly any unattractive smile. One of the best and most cost-effective of these is the porcelain veneer. These thin layers of dental porcelain are bonded over the front of chipped, slightly misaligned or stained teeth to create an entirely new look.
Veneers have evolved over time, especially with the materials they contain that give them their beauty and life-likeness. The first veneers were made mainly of feldspathic porcelain, a mineral composition known for its similarity in color and translucence to natural teeth.
But because this early porcelain had a high amount of silica (in essence, glass), and because they were created through overlaying several thin layers that weren’t as strong as a single piece, they were prone to shattering. This made them problematic for teeth subject to heavy biting forces or patients with clenching or grinding habits.
The situation changed dramatically in the 1990s, when dental labs began adding Leucite, a sturdier glass-like mineral that didn’t diminish the porcelain’s translucence. Not only did Leucite make veneers more shatter-resistant, it also enabled dental technicians to fashion most of the veneer in one piece to further strengthen it.
More recent veneers may now incorporate an even stronger material called lithium disilicate. Because lithium disilicate has twice the strength of Leucite, veneers made with it can be as thin as 0.3 millimeters. Not only does this blend together the most desirable qualities expected of a veneer—strength, aesthetic appeal and easy fabrication—it allows for a broader range of situations and uses.
Both of these materials can be pressed or milled to assume the exact shape necessary to fit a particular tooth. The manufacturing process also allows for creating smaller veneers that can then be overlaid with porcelain for the most life-like appearance possible.
Thanks to these stronger materials enhancing the natural beauty of porcelain, we now have a wider creative palate for transforming your smile.
If you would like more information on porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Veneers: Your Smile—Better Than Ever.”
Want to know the exact wrong way to pry open a stubborn lid? Just ask Jimmy Fallon, host of NBC-TV’s popular “Tonight Show.” When the 40-year-old funnyman had trouble opening a tube of scar tissue repair gel with his hands, he decided to try using his teeth.
What happened next wasn’t funny: Attempting to remove the cap, Fallon chipped his front tooth, adding another medical problem to the serious finger injury he suffered a few weeks before (the same wound he was trying to take care of with the gel). If there’s a moral to this story, it might be this: Use the right tool for the job… and that tool isn’t your teeth!
Yet Fallon is hardly alone in his dilemma. According to the American Association of Endodontists, chipped teeth account for the majority of dental injuries. Fortunately, modern dentistry offers a number of great ways to restore damaged teeth.
If the chip is relatively small, it’s often possible to fix it with cosmetic bonding. In this procedure, tough, natural-looking resin is used to fill in the part of the tooth that has been lost. Built up layer by layer, the composite resin is cured with a special light until it’s hard, shiny… and difficult to tell from your natural teeth. Best of all, cosmetic bonding can often be done in one office visit, with little or no discomfort. It can last for up to ten years, so it’s great for kids who may be getting more permanent repairs later.
For larger chips or cracks, veneers or crowns may be suggested. Veneers are wafer-thin porcelain coverings that go over the entire front surface of one or more teeth. They can be used to repair minor to moderate defects, such as chips, discolorations, or spacing irregularities. They can also give you the “Hollywood white” smile you’ve seen on many celebrities.
Veneers are generally custom-made in a lab, and require more than one office visit. Because a small amount of tooth structure must be removed in order to put them in place, veneers are considered an irreversible treatment. But durable and long-lasting veneers are the restorations of choice for many people.
Crowns (also called caps) are used when even more of the tooth structure is missing. They can replace the entire visible part of the tooth, as long as the tooth’s roots remain viable. Crowns, like veneers, are custom-fabricated to match your teeth in size, shape and color; they are generally made in a dental lab and require more than one office visit. However, teeth restored with crowns function well, look natural, and can last for many years.
So what happened to Jimmy Fallon? We aren’t sure which restoration he received… but we do know that he was back on TV the same night, flashing a big smile.
If you would like more information about tooth restorations, please contact us or schedule a consultation. You can learn more in the Dear Doctor magazine articles “Porcelain Crowns & Veneers” and “Artistic Repair Of Front Teeth With Composite Resin.”
Many Hollywood luminaries use porcelain veneers to enhance their smiles. Take actress and singer Hilary Duff, who, according to People magazine, had veneers placed on her two front teeth after chipping them on a microphone during what must have been an extremely energetic performance.
Well, you don't have to be a Hollywood star to benefit from a smile enhanced with porcelain veneers. If you have small chips, cracks, slight tooth rotations or minor spacing problems, veneers may be able to give you back your smile — or an even better one.
The word “veneer” refers to a super-thin covering, and in dentistry a veneer is a thin layer of porcelain that replaces your natural tooth enamel. Porcelain is the material of choice because of its strength, translucency, and ability to resist erosion.
In the right hands, dental porcelain can mimic tooth enamel perfectly. To make veneers, a skilled dental technician will mix porcelain powder (in a shade specified by the dentist) with water and then fire the material in an oven like pottery; the porcelain is built up in layers for a truly lifelike effect.
Before a veneer is bonded to a tooth, often we need to remove a tiny bit of the tooth's existing enamel so that the final effect will not be too bulky. The procedure is virtually painless and can be completed in as little as two visits. Because enamel is removed, this particular cosmetic treatment is not reversible. Sometimes veneers can be added directly onto the tooth surface without any tooth reduction and therefore are reversible if used in this way.
Once you have veneers, please keep in mind that while extremely strong, porcelain veneers are not indestructible; you won't want to do things like crunch ice or break nuts open with your teeth. And if you are a teeth-grinder, you should wear a nightguard to protect your beautiful new smile. With proper care, your veneers will last 20 years or more.
If you would like more information about porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more by reading the Dear Doctor magazine article “Smile Design Enhanced With Porcelain Veneers.” Dear Doctor also has more on “Cosmetic Dentistry: A Time For Change.”